Hot Surface Ignition Control


✚✚✚ Hot Surface Ignition Control

The 780 Series Hot Surface Ignition Modules are designed for use on gas fired heating systems. The system acts on a demand for heat by a switch or thermostat to supply power to the ignition control. On non pre-purge models, the ignitor will be energized immediately and remain on for either of two optional selected ignitor heat-up times approximately 17 or 34 seconds. For models with the prepurge option, there is a time delay equal to the heat-up time selected before the ignitor is energized. At the end of the ignitor heat-up time the gas valve is opened supplying gas to the main burner. After several seconds, the ignitor is turned off and the sensor is energized. As long as flame is sensed, the system continues to operate. When the thermostat is satisfied, the gas control will be closed to shut off the main burner. The 780 Series provides lockout and complete gas shut off if ignition is not proven after the trial for ignition sequences has been completed. To reset the system the thermostat or system switch must be opened for at least 10 seconds.

Read more
Hot Surface Ignition Control - The 780 Series Hot Surface Ignition Modules are designed for use on gas fired heating systems. The system acts on a demand for heat by a switch or thermostat to supply power to the ignition control. On non pre-purge models, the ignitor will be energized immediately and remain on for either of two optional selected ignitor heat-up times approximately 17 or 34 seconds. For models with the prepurge option, there is a time delay equal to the heat-up time selected before the ignitor is energized. At the end of the ignitor heat-up time the gas valve is opened supplying gas to the main burner. After several seconds, the ignitor is turned off and the sensor is energized. As long as flame is sensed, the system continues to operate. When the thermostat is satisfied, the gas control will be closed to shut off the main burner. The 780 Series provides lockout and complete gas shut off if ignition is not proven after the trial for ignition sequences has been completed. To reset the system the thermostat or system switch must be opened for at least 10 seconds..

Features
  • Rheem part no. 62-22578-02
  • Molded-in terminal barriers between terminals.
  • Mounting screw provides a positive ground connection
  • Small compact size provides "no hassle" installation.
  • FREE NEXT DAY AIR SHIPPING

    • Hot Surface Ignition Control?

    Is it possible to find the best opinion about Hot Surface Ignition Control ? Read customer review, features, specifications, description, check prices updated and satisfactory for Hot Surface Ignition Control product reviews!

    Some Suggestions
    • If you are interested in purchasing Hot Surface Ignition Control, you can try to find a complete description and detailed product information.
    • Read reviews will give you a more comprehensive understanding of the advantages and disadvantages of the product you need.
    • You can try to find a similar item, sometimes it helps to choose to buy.
    • You can try to find and view the discussions.
    • Distribution information for each product details.
    • You can try to find the product's features.
    • In general, as far as I know, customers buy Hot Surface Ignition Control or other products on the Internet also interested in a review, outlets and stores, shipping, gift ideas, the city's trading, sales, coupons online, new holidays and cheap, and the lowest price of the day-to-day transactions, bargain, best Buy products including special offers Hot Surface Ignition Control, best price, discount coupons, top and offers great promotions, last minute transactions ...Other Information




    Filed Under:

    Comments (0)

    Post a Comment

    Subscribe to: Post Comments (Atom)